Stato di disponibilità: | |
---|---|
1,5 pollici 1,75 pollici 1,875 pollici 2 pollici
Ruixin
Tagliacavi Flopetrol
Lega di acciaio e lega di nichel
Cina Baoji
Wireline e Slickline
Standard
Flopetrol Cable Cutter,When downhole tools are stuck and cannot be recovered, Use this tool to cut the steel wire or wire rope from the head of the rope socket.
Size | OD | FN. | Applicable wire |
1.5" | 1.5" | 1.375" | 0.092",0.108",0125" |
1.75" | 1.75" | 1.375" | 0.092",0.108",0125" |
1.875" | 1.875" | 1.75" | 0.092",0.108",0125" |
2" | 2" | 1.75" | 0.108",0125" |
1. If the steel wire is knotted or deformed, it will not be cut off by mistake, which can reduce the risk of operation error.
2. The tool can effectively cut the underground steel wire or wire rope near the rope cap head.
3. Replacing the taper sleeve can cut off different specifications of steel wire or wire rope, and the maximum can cut off the wire rope.
4. After cutting the steel wire or wire rope, the steel wire head can be bent, and the steel wire can be taken out together with the tool when it is pulled out.
1.Unscrew the tool holder and punch out the straight sleeve. The taper sleeve can be
2.changed as required. Pay attention to its positional relationship when installing the blade and tool holder.
Welcome to contact us at any time.
Flopetrol Cable Cutter,When downhole tools are stuck and cannot be recovered, Use this tool to cut the steel wire or wire rope from the head of the rope socket.
Size | OD | FN. | Applicable wire |
1.5" | 1.5" | 1.375" | 0.092",0.108",0125" |
1.75" | 1.75" | 1.375" | 0.092",0.108",0125" |
1.875" | 1.875" | 1.75" | 0.092",0.108",0125" |
2" | 2" | 1.75" | 0.108",0125" |
1. If the steel wire is knotted or deformed, it will not be cut off by mistake, which can reduce the risk of operation error.
2. The tool can effectively cut the underground steel wire or wire rope near the rope cap head.
3. Replacing the taper sleeve can cut off different specifications of steel wire or wire rope, and the maximum can cut off the wire rope.
4. After cutting the steel wire or wire rope, the steel wire head can be bent, and the steel wire can be taken out together with the tool when it is pulled out.
1.Unscrew the tool holder and punch out the straight sleeve. The taper sleeve can be
2.changed as required. Pay attention to its positional relationship when installing the blade and tool holder.
Welcome to contact us at any time.